1.25 Gbps SFP transponder
The SPEED-SINGLELINE SFP is a multifunctional and compact 2-port SFP active transponder module for universal use in telecommunication networks. The main field of application is cost-optimized CWDM and DWDM networks where the SPEED-SINGLELINE SFP, as an intelligent transponder module, converts a transparent data channel to a corresponding CWDM/DWDM wavelength. The module can be managed locally via Telnet (SNMP) or CLI interface and through SNMP or web by using the optionally available management module.
SPEED-SINGLELINE – an active transponder module for xWDM networks
Media / interface converter in a standalone housing
The SPEED-SINGLELINE SFP can be used as a protocol transparent electrical-to-optical interface converter in e.g. SDH (STM-1), IP (Fast Ethernet, Gigabit Ethernet) or Storage (ESCON, FICON, Fibre Channel) networks.
One application transmitted via a single pair of fibre without external xWDM multiplexer
This module is ideally suited for implementation in purely optical network infrastructures to convert among various fibre types (Multimode/Singlemode) and wavelengths (e.g. 1310 nm to 1530 nm) while any protocol (e.g. IP, SDH, video or storage) starting from 100 Mbps up to 1.25 Gbps is supported. In addition a single fibre transmission can be accomplished by using bidirectional transceiver.
Features:
- Protocol transparent (100 Mbps to 1.25 Gbps)
- Ideal for IP, SDH, video and storage applications
- An extremely flexible and cost-optimized C/DWDM service module (SFP-based) or basic media converter
- Distances: Up to 40 km without signal regeneration
- Extremely compact design: only 1-slot in the 19" SPEED-CARRIER platform
Specifications:
General:
- LED indicators: Unit status, optical link, local loops
- Dimensions (H x W x D): 21 x 131 x 190mm
- Power supply via backplane
SFP ports:
- 2 SFP slots (1 x line, 1 x client)
- Protocol: Transparent or SFP-specific
- Data rate: 100 Mbps to 1.25 Gbps depending on the SFP type
- Link-Loss-Carry-Forward (LLCF): Shut-down of client SFP if loss of signal occurs at the line SFP
Housing types:
- 1-slot stand-alone housing
- 4 slot SPEED-CARRIER 1U
- 16 slot SPEED-CARRIER 4.5U
SFP Types:
- Use of SFPs according to MSA standard
- Copper / electrical interfaces:
- IP: Fast Ethernet, Gigabit Ethernet (RJ45)
- SDH: STM-1 BNC
- Optical (LC):
- IP: Fast Ethernet, Gigabit Ethernet
- SDH: STM-1, STM-4
- Storage: 1 GFC, FICON, ESCON
Management:
- Telnet, CLI
- SNMP via SPEED-NMS OE
- Web
- Loops on SFP ports
- SFP management information provided by integrated DMI
