1.25 Gbps SFP transponder
1.25 Gbps SFP transponder
 
The SPEED-SINGLELINE SFP is a multifunctional and compact 2-port SFP active transponder module for universal use in telecommunication networks. The main field of application is cost-optimized CWDM and DWDM networks where the SPEED-SINGLELINE SFP, as an intelligent transponder module, converts a transparent data channel to a corresponding CWDM/DWDM wavelength. The module can be managed locally via Telnet (SNMP) or CLI interface and through SNMP or web by using the optionally available management module.
Read more...
Dual 1.25Gbps SFP transponder
Dual 1.25Gbps SFP transponder
By using the SPEED-DUALLINE SFP Compact optical transponder module with four SFP ports it is possible to increase the capacity of one single pair of fibre with a protocol transparent transmission of up to 16 applications ( SDH, IP, Storage, video, etc.). The SPEED-DUALLINE SFP performance a conversion of the standard wavelength (850 nm, 1310 nm, 1550 nm) to a dedicated CWDM wavelength with a network termination which can be managed actively. The SPEED-DUALLINE SFP is a cost effective solution for transmission distances up to 40 km.
Read more...
Dual 2.67 Gbps SFP 3R transponder module
Dual 2.67 Gbps SFP 3R transponder module
With this Compact optical transponder module with 3R and link/line protection intelligence it is possible to increase the capacity of one single pair of fibre with a protocol transparent transmission of up to 80 applications (SDH, IP, Storage, video, etc.). The SPEED-DUALLINE SFP 3R performance a conversion of the standard wavelength (850 nm, 1310 nm, 1550 nm) to a dedicated CWDM or DWDM wavelength with an actively managed network termination. By utilizing of the integrated 3R functionality of the module transmission distances up to 120 km can be achieved without additional amplifier modules.
Read more...
10 Gbps XFP transponder module
10 Gbps XFP transponder module
The SPEED-SINGLELINE XFP Compact optical 10 Gbps module is a cost-efficient conversion module for high-speed 10G signals. The module supports two flexible XFP ports suitable for wavelength conversion (850 nm, 1310 nm, 1550 nm, CWDM/DWDM or tunable optics) while the optical power budget (up to 15 dB/approx. 40 km distance) and the transferring application (10 GbE, 10 G FC, STM-64) are individually defined. The SPEEDSINGLELINE XFP can be used for existing 10 Gigabit systems like 10 Gigabit Ethernet switches to achieve long distances (up to 40 km). Thus existing 10 Gigabit systems are not restricted to installed 10 Gigabit optics which are limited to a few kilometers.
Read more...
10 Gbps XFP transponder module with 3R
10 Gbps XFP transponder module with 3R
This SPEED-SINGLELINE Compact optical 10 Gbps module with 3R functionality is a cost-saving conversion module for high-speed 10G signals. The module supports two flexible XFP ports suitable for wavelength conversion (850 nm, 1310 nm, 1550 nm, CWDM/DWDM or tunable optics) while the optical power budget (up to 24 dB/approx. 80 km distance) and the transferring application (10 GbE, 10 GFC, STM-64) are individually defined. The SPEED-SINGLELINE XFP can be used for existing 10 Gigabit systems like 10 Gigabit Ethernet switches to achieve long distances (up to 80 km). Thus existing 10 Gigabit systems are not restricted to installed 10 Gigabit optics which are limited to a few kilometers.
Read more...
Dual 2/4/8G FC SFP+/XFP transponder
Dual 2/4/8G FC SFP+/XFP transponder
 
Compact Fibre Channel transponder supporting 3R, cross-connect and protection. The SPEED-DUALLINE FC XFP/SFP+ module is designed as an flexible and high data rate transponder. Depending on customers requirement this module offers both, four SFP+ ports or alternatively two SFP+ to two XFP ports. The SPEED-DUALLINE FC XFP/SFP+ converts two independent 2/4/8 GFC signals into a corresponding wavelength in CWDM and DWDM network infrastructures. In addition the integrated 3R functionality enables to accomplish a transmission of long distances up to 80 km.
Read more...
10G 2R XFP Dual 10.3 Gbps Ethernet transponder
10G 2R XFP Dual 10.3 Gbps Ethernet transponder
The SPEED-DUALLINE 10G module is designed as an flexible and high data rate transponder. Depending on customers requirements this module offers both, two SFP+ to two XFP ports. The module supports two flexible XFP ports suitable for wavelength conversion (850 nm, 1310 nm, 1550 nm, CWDM/DWDM or tunable optics) while the optical power budget (up to 15 dB/approx. 40 km distance) and the transferring application (10 GbE, 10 GFC, STM-64) are individually defined. The SPEED-DUALLINE 10G converts two independent 10.3 Gbps Ethernet signals into a corresponding wavelength in CWDM and DWDM network infrastructures. Combined with the 3R functionality (Reamplification, Re-shaping and Re-timing) a transmission of 10G Ethernet over long distances can be implemented.
Read more...
Dual 10.3 Gbps Ethernet transponder
Dual 10.3 Gbps Ethernet transponder
Compact and flexible 10.3 Gbps Ethernet 2 channel transponder with 3R functionality. The SPEED-DUALLINE 10G module is designed as a flexible and high data rate transponder. Depending on customers requirements this module offers both, four SFP+ ports or alternatively two SFP+ to two XFP ports. The SPEED-DUALLINE 10G converts two independent 10.3 Gbps Ethernet signals into a corresponding wavelength in CWDM and DWDM network infrastructures.
Read more...
16-Gbps Fibre Channel transponder card
16-Gbps Fibre Channel transponder card
The SPEED-DUALLINE 16G is a compact 2 channel transponder card. Depending on customer application, the SPEED-DUALLINE 16G can be equipped with four SFP+ ports or with two SFP+ and two XFP Ports. In CWDM and DWDM networks they implement up to two 4/8/16 GFC channels on corresponding CWDM and DWDM wavelengths. In addition, the SPEED-DUALLINE 16G with the integrated 3R (Reshaping, Reamplification, Retiming) function permits perfect transmission also over longer distances. A further area of application of the SPEED-DUALLINE 16G is the interface conversion of SFP+ transceivers to XFP transceivers. The SPEED-DUALLINE 16G permits 1+1 protection for redundant coupling of two sites via fibre channel. Thus, up to 80 km without intermediate site can be bridged. Depending on customer requirements, always two 4/8/16 GFC signals can be transmitted. In addition, SNMP Traps can be sent to a management system via Ethernet over the integrated SNMP transmitter. The system card makes possible a conversion of the 10 Gbps signals in OUT-2 data packets by using OTN-DWDM transceivers and thus prepares the access point in an OTN network. Furthermore, with these OTN-Transceivers use can be made of FEC (Forward Error Correction) functionality and thus greater distances can be bridged.
Read more...
100 Gbps CXP Transponder Card
100 Gbps CXP Transponder Card
The SPEED-SINGLELINE Compact optical 100 Gbps CXP Transponder Card provides 100 Gbps Conversion for Multimode, singlemode and DWDM; Transport of 100 Gbps Ethernet according to OTU-4; Support of coherent tunable DWDM CFP transceivers and is optimized for 100 Gbps Ethernet with SR10 interfaces.
Read more...
|
|
|
|
