XMP1-LCC STM16 Large Cross Connect
XMP1-LCC STM16 Large Cross Connect
The XMP1-LCC (Large Cross-Connect) is a compact SDH/PDH/Ethernet cross–connect multiplexer which unites high cross-connect capacity and a high number of interfaces in a compact 3 HU sub-rack. XMP1-LCC offers up to 4 x STM-1/4/16, 8 x STM-1/-4, 256 x E1. The integrated TDM cross-connect switches the traffic on SDH level (48 x VC-4, 3024 x VC-12, 144 x VC-3) and E1 level respectively 64 kbps level (8064 x 64 kbps [252 x E1]). When switching on 64 kbps level it can be selected whether CAS signalling is to be forwarded in parallel to the payload in timeslot 16.The supported features, its compact design and the variety of units make XMP1-LCC suitable for a wide range of scenarios. The cross-connect capacity makes it the ideal solution for large network nodes in dedicated networks. It is first choice also for locations where large numbers of incoming 64kbps connections have to be multiplexed or where different technologies (SDH, PDH, 64kbps) have to be transmitted.
Read more...
1U, STM 4 / STM 1 NG-SDH ADM Rack
SDH04A 1U, STM 4 / STM 1 NG-SDH ADM Rack
The SDH04A is a compact NG-SDH device which supports STM-1/4 ADM and offers various tributary interfaces like E1/T1, V.35, FE/GbE, E3/ T3…etc to provide any service in any slot. The SDH04A is suitable for the applications of GSM/UMTS base station radio access networks (RAN) / MSAN and wireless backhaul. The SFP cage design in SDH04A offers the plug-and-play flexibility to change fibre modules for different bit rate and higher availability to use off-the-shelf fibre modules. The SDH04A is a 1U standard form factor making it easy to fit in any 19” or 23” chassis and outdoor cabinet; Although the SDH04A is a compact NG-SDH box, it also has similar flexibility of shelf-type SDH equipment, such as hot-swappable tributary cards / fibre modules / power modules and 1+1 load-sharing redundant power design. In order to supply reliable networks to carry more upcoming broadband services from wireless / HSDPA base stations to central office, the SDH04A provides carrier-grade Ethernet (E-Line) bundled with L2 functions to totally control QoS between end to end.
Read more...
iSAP1000 STM1/E1 Multiplexer
iSAP1000 STM1/E1 Multiplexer
 v3 Feb 2014.png "iSAP1000 STM1/E1 Multiplexer")
The iSAP1000 is 1U 19” rack type STM-1/E1 terminal multiplexer which delivers traditional PDH services over SDH networks. iSAP1000 provides connectivity for up to 16E1. The product complies with SDH standards and interfaces with existing SDH backbones through a single or 1+1 protection STM-1 interface. iSAP1000 supports a variety of management access over console, Telnet and SNMP. iSAP1000 provides two Gigabit Combo ports (2-port 10/100/1000Base-T and 2-port 1000Base-X SFP slot) with 16x E1 or 2x STM-1 fibre interfaces. The two GE combo ports support Link aggregation, port based VLAN and 802.1Q VLAN function.
Read more...
iSAP2000 2U, STM1/E1 Managed Multiplexer
iSAP2000 2U, STM1/E1 Managed Multiplexer
The iSAP2000 is a 2U 19” 6 slots rack type E1 Time Division Multiplexer for fractional E1 network access, which is designed for non-stop operation. There are 6 slots available for hot-swappable I/O cards and two slots are provided for power supplies. Uplink supports E1 copper connection, maximum up to 96x E1 cross connect for Voice and Data. The iSAP2000 optionally accommodates up to two separate power supplies, which may derive power from AC (110/220) or DC (-36~72V) power sources. When two power supplies are installed, the modules provide complete power redundancy and are hot swappable even during the E1 cards' transmission. The iSAP2000 provides E1 copper uplink, the maximum E1 supports up to 96 E1 channels with cross connection for Voice and Data, the interface included RS232, RS485, G703/64K, V35, FXS, FXO, ET100 & E&M.
Read more...
iSAP5100 4.5U STM1/E1 Managed Multiplexer
iSAP5100 4.5U STM1/E1 Managed Multiplexer
The iSAP5100 is a 4.5U 19” 18 slots rack type STM1 / E1 Time Division Multiplexer for fractional E1 network access, which is designed for nonstop operation. There are 18 slots available for hot-swappable iSAP5100 I/O cards. Two slots are provided for CPU Controller cards and two slots are provided for power supplies. Uplink supports STM1 fibre and E1 copper, two types of connection, maximum up to 144x E1 cross connect for Voice and Data. The iSAP5100 accommodates up to two separate power supplies, which may derive power from AC (110/220) or DC (-36~72V) power sources. When two power supplies are installed, the modules provide complete power redundancy and are hot swappable even during the E1 cards' transmission. The iSAP5100 provides STM1 fibre and E1 copper uplink with a the maximum E1 support of up to 96 E1 channels with cross connection for Voice and Data or interface including RS232, V.35, G703/64K, FXS, FXO, ET100 and E&M.
Read more...
|
|
|
|
