Gigabit Ethernet PoE+ Injector

Gigabit Ethernet PoE+ Injector


The INJ-IG01-PH is an industrial grade, single port, gigabit Ethernet PoE (Power over Ethernet) injector. PoE technology describes a system to pass electrical power safely, along with data, on Ethernet cabling. The original IEEE 802.3af-2003 PoE standard provides up to 15.4 W of DC power to each device. The updated IEEE 802.3at-2009 PoE standard also known as PoE+ or PoE plus, provides up to 30 W of power. Additionally, INJ-IG01-PH can provide up to 36/60W through the non-standard use of all 4 pairs of category 5 cable. Housed in a rugged DIN rail or wall mountable enclosure, this product is designed for harsh environments, such as industrial networking, security, intelligent transportation systems (ITS) and is also suitable for many military and utility market applications where environmental conditions exceed commercial product specifications. Standard operating temperature range models (-10 to 60°C) and wide operating temperature range models (-40 to 75°C) fulfill the special needs of industrial automation applications.

Gigabit Ethernet PoE+ Injector schematic


  • Provides 1 port IEEE802.3at/af PoE Injector
  • Power output 15.4W, 30W, 36W, 60W select by DIP SW
  • PoE Mode A/B Select by DIP SW
  • 4 Pairs PD handshake mode select by DIP SW (Such as AXIS® IP cam)
  • Wide operating temperature -40 ~ 75°C (INJ-IG01-PHE)
  • IP30 rugged metal housing


IEEE Standards:

  • IEEE 802.3 10Base-T Ethernet
  • IEEE 802.3u 100Base-TX Fast Ethernet
  • IEEE 802.3ab 1000Base-T Gigabit Ethernet
  • IEEE 802.3at, IEEE802.3af

PoE Standard: IEEE 802.3at/af
PoE RJ-45 pin assignment:

  • RJ-45 support IEEE 802.3at/af Middle-Span, Alternative B mode or End-Span Alternative A mode, set by DIP SW
  • End-Span, Alternative A mode:
    • Positive (V+): RJ-45 pin 1, 2.
    • Negative (V-): RJ-45 pin 3, 6.
    • Data (1, 2, 3, 6, 4, 5, 7, 8)
  • Middle-Span, Alternative B mode
    • Positive (V+): RJ-45 pin 4,5
    • Negative (V-): RJ-45 pin 7,8
    • Data (1, 2, 3, 6, 4, 5, 7, 8)

Network Connector:

  • 1 RJ-45 for 10/100/1000Base-T Data, and 1 RJ-45 for 10/100/1000Base-T Data with PoE Output power

Network Cable:

  • UTP/STP above Cat. 5e cable
  • EIA/TIA-568 100-ohm (100m)


  • Per unit: Power 1 (Green)
  • Alt A/PoE ,Alt B/PoE (Green)
    • ON: when a PD device is connected to the GbE+PoE RJ-45 connector and the Injector is feeding power in Alt A or B mode.
    • Blinking: One of the Injector faults (overload, short circuit or over-temperature) occurs.


  • SW1 ON: Alternative B mode PoE Power Pin 4, 5, 7, 8 (When DIP SW 3 Off); OFF: Alternative A mode PoE Power Pin 1, 2, 3, 6 (When DIP SW 3 Off)
  • SW2 ON: Hi Power 36W 36W PoE output; OFF: Standard PoE 802.3af (15.4W), 802.3at (30W)
  • SW3 ON: 4 Pair PoE Pin Ultra-High Power 60W PoE Output; OFF: 2 Pair PoE Pin depand on DIP SW 1,2
  • SW4 60W PD handshake mode; OFF General PD at ether 2 or 4 pairs mode; ON Compatible with some particular PD devices at high power mode (4 Pair mode),such as AXIS® Q60

Reserve polarity protection: Present
Overload current protection: Present
Power Supply: (44~57VDC) Input power (Removable Terminal Block)
PoE Power Output: Maximum Ultra High Power 60W, IEEE802.3at 30W, IEEE802.3at High power 36W, IEEE802.3af 15.4W
Power Consumption:

  • Input Power Consumption: 30W Mode: 31.1W; 60W Mode: 62.8W
  • PoE Output Power: 30W Mode: 30W; 60W Mode: 60W

Removable Terminal Block: Provide 2 Pin for power input connectorn
Operating Temperature: -10 ~ 60°C (INJ-IG01-PH); -40 ~75°C (INJ-IG01-PHE)
Operating Humidity: 5% to 95% (Non-condensing)
Storage Temperature: -40 ~ 85°C
Housing: Rugged Metal, IP30 Protection
Dimension: 70 x 30 x 103 mm (D X W X H)
Installation mounting:
DIN Rail mounting and Wall Mounting (Optional)

  • FCC Part 15 Subpart B Class A
  • CE EN55022 Class A
  • Railway Traffic: EN50121-4 (Pending)
  • Immunity for Heavy Industrial Environment: EN61000-6-2
  • Emission for Heavy Industrial Environment: EN61000-6-4


  • EN61000-4-2 (ESD) Level 3, Criteria B
  • EN61000-4-3 (RS) Level 3, Criteria A
  • EN61000-4-4 (Burst) Level 3, Criteria A
  • EN61000-4-5 (Surge) Level 3, Criteria B
  • EN61000-4-6 (CS) Level 3, Criteria A
  • EN61000-4-8 (PFMF, Magnetic Field) Field Strength: 300A/m, Criteria A

Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
MTBF: 409,994 hours
Warranty: 5 years

Live Demo of FRM220 Chassis

More Information

0 (Min. 0 Characters)
Company Name
0 (Min. 0 Characters)
Your Email
0 (Min. 16 Characters)