8x 10/100Base-TX+ 3x 100/1000Base-X SFP

IFS-803GSM 8x 10/100Base-TX+ 3x 100/1000Base-X SFP

 

The IFS-803GSM models are managed industrial grade Fast Ethernet switches with 8x 10/100Base-TX ports and 3x 100/1000Base-X SFP Gigabit/Fast Ethernet ports that provide stable and reliable Ethernet transmission. The Ethernet switches support a variety of management functions, including STP/RSTP/MSTP and ITU-T G.8032 Ring <50ms recovery time, layer 2 Ethernet IGMP, VLAN, QoS ,Security ,IPv6, bandwidth control, port mirroring, cable diagnostic and Green Ethernet. Housed in rugged DIN rail or wall mountable enclosures, these switches are designed for harsh environments, such as industrial networking, security automation applications, intelligent transportation systems (ITS) and are also suitable for many military and utility market applications where environmental conditions exceed commercial product specifications. Standard operating temperature range models (-10 to 60°C) and wide operating temperature range models (-40 to 75°C) fulfil the special needs of industrial automation applications.

IFS-803GSM 8x 10/100Base-TX+ 3x 100/1000Base-X SFP application

Features:

  • 8x 10/100Base-TX RJ-45 with 3x 100/1000Base-X SFP Fibre
  • UL60950-1, CE, FCC, Rail Traffic EN50121-4 certified
  • Industrial Grade EMS, EMI, EN61000-6-2, EN61000-6-4 certified
  • Cable diagnostic, Measuring cable OK or broken point distance
  • Supports IEEE802.3az EEE (Energy Efficient Ethernet) Management to optimize the power consumption
  • STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring(EPR) for cabling redundant
  • μ-Ring for Redundant Ethernet Ring, recovery time<20ms in 250 units
  • QoS, Traffic classification QoS, CoS, bandwidth control for Ingress and Egress, Storm Control, DiffServ
  • IEEE802.1Q VLAN, port based VLAN, MAC based VLAN, IP subnet based VLAN, Protocol based VLAN, VLAN translation, MVR
  • Dynamic IEEE 802.3ad LACP Link Aggregation, Static Link Aggregation
  • IGMP/MLD snooping V1/V2/V3, IGMP Filtering/ Throttling, IGMP query, IGMP proxy reporting, MLD snooping
  • Security : Port based and MAC based IEEE802.1X, RADIUS, ACL, TACACS+, HTTP/HTTPS, SSL/SSH v2
  • Software upgrade via TFTP and HTTP, redundant firmware in case of upgrade failure
  • DHCP client/Relay/Snooping/Snooping option 82/Relay option 82
  • RMON, MIB II, Port mirroring, Event syslog, DNS, NTP/SNTP, IEEE802.1ab LLDP
  • Supports IPv6 Telnet server /ICMP v6, SNMP, HTTP, SSH/SSL, NTP/SNTP, TFTP, QoS, ACL
  • CLI, Web based management, SNMP v1/v2c/v3, Telnet server for management

Specifications:

IEEE Standard:

  • IEEE 802.3 10Base-T 10Mbit/s Ethernet
  • IEEE 802.3u 100Base-TX, 100Base-FX, Fast Ethernet
  • IEEE 802.3ab 1000Base-T Gbit/s Ethernet over twisted pair
  • IEEE 802.3z 1000Base-X Gbit/s Ethernet over Fibre-Optic
  • IEEE 802.1d STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP
  • IEEE 802.1w RSTP (Rapid Spanning Tree Protocol)
  • IEEE 802.1s MSTP (Multiple Spanning Tree Protocol)
  • ITU-T G.8032/ Y.1344 EPR (Ethernet Protection Ring)
  • IEEE 802.1Q for VLAN Tagging
  • IEEE 802.1X for Authentication
  • IEEE 802.3ad for Port Trunk with LACP
  • IEEE802.3x Flow Control and Back Pressure
  • IEEE 802.1ad Stacked VLANs, Q-in-Q
  • IEEE 802.1p LAN Layer 2 QoS/CoS Protocol for Traffic Prioritization
  • IEEE 802.1ab Link Layer Discovery Protocol (LLDP)
  • IEEE 802.3az EEE (Energy Efficient Ethernet)

VLAN ID: 4096
Switch Architecture: Back-plane : 7.6Gbps
Data Processing: Store and Forward
Flow Control: IEEE 802.3x for full duplex mode; Back pressure for half duplex mode
Jumbo Frame: 9.6KB
MAC address Table Size: 8K

Network Connector:

  • 8x 10/100Base-TX RJ-45 and 2x 100/1000Base-X SFP Fibre connector
  • RJ-45 UTP port supports Auto negotiation speed, Auto MDI/MDI-X function, SFP port support dual speed with DDMI

Console: RS-232 (RJ-45)
Network Cable: UTP/STP above Cat. 5e cable; EIA/TIA-568 100-ohm (100m)
Protocols: CSMA/CD
Reverse polarity protection: Present
Overload current protection: Present
CPU Watch Dog: Present
Power Supply: Redundant Dual DC 12/24/48V (9.6~60VDC) Input power (Removable Terminal Block)
LED:

  • Per unit: Power 1 (Green), Power 2 (Green), Fault (Amber), CPU Act (Green), Ring Master (Yellow)
  • Per RJ-45 port: 10/100 Link/Active (Green); 1000 Link/Active (Amber)
  • SFP Fibre Per port: Link/Active (Green)

Power Consumption: 12VDC 6.5W; 24VDC 7W; 48VDC 8.6W

Warning Message: System Syslog, SMTP/ e-Mail event message, alarm relay
Alarm Relay Contact: Relay outputs with current carrying capacity of 1 A @24VDC
Removable Terminal Block: Provide 2 Redundant power, Alarm relay contact, 6 Pin
Operating Temperature: -10 ~ 60°C (IFS-1604GSM), -40 ~ 75°C (IFS-1604GSM-E)
Operating Humidity: 5% to 95% (Non-condensing)
Storage Temperature: -40 ~ 85°C
Housing: Rugged Metal, IP30 Protection
Case Dimension: 72 x 106 x 152mm (W x D x H)
Installation mounting: DIN Rail mounting and Wall Mounting
EMC/EMS: CE, FCC
EMI:

  • FCC Part 15 Subpart B Class A, CE EN 55022 Class A
  • EN61000-6-4 – Emission for industrial environment

EMS:

  • EN61000-6-2 – Immunity for Industrial environment
  • EN61000-4-2 (ESD) Level 3,Criteria B
  • EN61000-4-3 (RS) Level 3,Criteria A
  • EN61000-4-4 (EFT) Level 3,Criteria A
  • EN61000-4-5 (Surge) Level 3,Criteria B
  • EN61000-4-6 (CS) Level 3,Criteria A
  • EN61000-4-8 (Magnetic Field) Level 3,Criteria A

Safety: UL60950-1 (Pending)
Rail Traffic: EN 50121-4
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
MTBF: 409,312Hrs
Warranty: 5 years

NB: Software specifications available on request

 


Live Demo of FRM220 Chassis

More Information

Name
0 (Min. 0 Characters)
Company Name
0 (Min. 0 Characters)
Your Email
Telephone
Message
0 (Min. 16 Characters)