10/100/1000Base-T to 100/1000Base-SX/LX & X SFP Managed GbE Converters
The IMC-1000M(S) models are managed Gigabit media converters that support conversion between electrical 10/100/1000Base-T and optical 100/1000Base-X Ethernet. Housed in rugged DIN rail or wall mountable enclosures, these converters are designed for harsh environments, such as industrial networking and intelligent transportation systems (ITS) and are also suitable for many military and utility market applications where environmental conditions exceed commercial product specifications. The converters are Web, SNMP or In-Band managed with an easy to use user interface for Operation, Administration, Maintenance & Provisioning, including bandwidth control, speed, VLAN, Diagnostic, storm filter or converter configurations. It also provides loop-back test and dying gasp, and can be monitored from a centrally located OAM-enabled FRM220-1000MS converter via remote in-band management.
Features:
- Conversion between 10/100/1000Base-T and 100/1000Base-X Fibre cable interface
- Supports Dual Rate (100/1000) SFP for selectable Fast or Gigabit speed on fibre
- Redundant dual DC input power 12/24/48VDC (9.6 ~ 60VDC)
- IP30 rugged metal housing and fanless
- Wide operating temperature -20~75°C (IMC-1000M(S)-E)
- UL60950-1, CE, FCC, RailWay traffic EN50121-4 certification
- Industrial grade EMS, EMI EN61000-6-2, EN61000-6-4 certification
- MIB counters
- Supports LFPT (Link Fault Pass Through)
- Auto Laser Shutdown (ALS)
- Supports SmartView for centralized management (Figure 1)
- Web management (Figure 3)
- SNMP management (Figure 1)
- Supports 16 IEEE 802.1Q Tag VLAN Group
- SNMP alarm trap for power loss and port link down
- Supports in-band management from FRM220 Chassis with FRM220-1000MS (Figure 2)
- Remote loop-back test
- Dying gasp (remote power failure detection)
Specifications:
Standards:
- IEEE802.3 10Base-T 10Mbit/s Ethernet
- IEEE802.3u 100Base-TX, 100Base-FX, Fast Ethernet
- IEEE802.3ab 1000Base-TX Gbit/s Ethernet over twisted pair
- IEEE802.3z 1000Base-X Gbit/s Ethernet over Fibre-optic
- IEEE802.3x Flow Control and Back pressure
- IEEE802.3ah OAM management
RJ45 Ports: 10/100/1000Base-T
Fibre Ports: 100Base-X or 1000Base-X set by Web Supports Auto Laser Shutdown (ALS)
CPU watch dog: Present
Push Button: Reset, Load default setting
Jumbo Frame: 9K bytes
Fibre Parameters:
- Fibre Cable (Multi-mode): 50/125um, 62.5/125um
- Fibre Cable (Single-mode): 9/125um
- Wavelength: 1310nm (Multi-mode/Single-mode)
- Available distance: 500M (Multi-mode SX); 20KM (Single-mode); 40KM (Single-mode) (IMC-1000M, IMC-1000M-E)
Link Fault Pass Through (LFPT):
- TX- Fibre: If TX port link down, the media converter will force Fibre port to link down
- Fibre-TX: If Fibre port link down, the media converter will force TX port to link down
Connector:
- Fibre: SC (Multi-mode, 500M), SC (Single-mode, 20KM, 40KM) (IMC-1000M, IMC-1000M-E)
- SFP Slot (IMC-1000MS, IMC-1000MS-E)
- RJ-45: CAT 5e (10/100/1000Mbps) Twisted Pair cable
- Auto MDI/MDI-X and Auto-Negotiation Function Supports
LED:
- Per Unit :Power 1 (Green ) ,Power 2 (Green) ,Fault (Amber )
- Fibre LNK/ACT (Green): ON: Connected to network, OFF: Not connected to network , BLK: Receive /Transmit Data
- Fibre Speed: Yellow : 1000Base-X, Green : 100 Base- X
- RJ-45 Port: Speed: 10 (OFF), 100 (Green), 1000 (Yellow)
- LNK/ACT for RJ45(Green): ON: Connected to network, OFF: Not connected to network, BLK: Networking is active
Reverse Polarity Protection: Present for Power Input
Overload Current Protection: Present
Power Supply: 12/24/48VDC (9.6~60VDC), Redundant power with polarity reverse protect function and removable terminal block
Alarm Relay Contact: Relay outputs with current carrying capacity of 1 A @24VDC
Removable Terminal Block: Provide 2 redundant power, alarm relay contact, 7 Pin
Operating Humidity: 5%~95% (Non-condensing )
Operating Temperature: -10°C~60°C (IMC-1000-M, IMC-1000MS); -20°C~75°C (IMC-1000M-E, IMC-1000MS-E)
Storage Temperature: -40°C~85°C
Housing: Rugged Metal, IP30 Protection
Dimensions: 106 x 38.6 x 142 mm (D x W x H)
Weight: 0.63kg (IMC-1000M, IMC-1000M-E); 0.62kg (IMC-1000MS, IMC-1000MS-E)
Installation: DIN Rail mounting or wall mounting
EMC: CE
EMI: FCC Part 15 Subpart B Class A, CE EN 55022 Class A
Rail Way Traffic: EN50121-4
Immunity for Heavy Industrial environment: EN 61000-6-2
Emission for Heavy industrial environment: EN 61000-6-4
EMS (Electromagnetic Susceptibility) Protection level:
- EN61000-4-2 (ESD) Level 3, Criteria B
- EN61000-4-3 (RS) Level 3, Criteria A
- EN61000-4-4 (EFT) Level 3, Criteria A
- EN61000-4-5 (Surge) Level 3, Criteria B
- EN61000-4-6 (CS) Level 3, Criteria A
- EN61000-4-8 (PFMF) Field strength 300A/m Criteria A
Safety: UL60950-1
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
MTBF: 544,905 hrs (IMC-1000MS, IMC-1000MS-E) (MIL-HDBK-217);559,059 hrs (IMC-1000MS, IMC-1000MS-E) (MIL-HDBK-217)
Warranty: 5 years
