FRM220-2.7G-3S 3R Transponder
The FRM220-2.7G-3S is a 3R 2.7G optical regeneration device, which consists of Re-amplification, Re-shaping and Re-timing. The transponder card converts a data signal to the correct wavelength for transmission on a specific channel by supporting SFP optics on both line side and client side interfaces. 1+1 Automatic optical line Protection Switching are supported for the aggregate fibre ports. When the FRM220-2.7G-3S card is placed in the FRM220 rack with SNMP management, the management can view the converter card's status, type, version, fibre link status and alarms. The card can be configured to enable or disable the port, reset the port and set the desired data rate.
Features:
- Multiple protocol supported at bit rates 28Mbps to 2.7Gbps (Fast Ethernet, Gigabit Ethernet, OC-3, OC-6, OC-12, OC-24, OC-48, STM-1, STM-4 STM-16, FC-1, FC-2)
- Network management via Web, Telnet, SNMP in central FRM220-CH20 chassis
- Local configuration via DB9 craft port In Stand-alone
- Digital Diagnostic monitoring of SFP module
- Perform optical repeater function (Re-amplification, Re-shaping, and Re-clocking)
- Facility loopback on both Client / Line sides
- 1+1 Optic fibre protection
- Link Fault Pass through (LFP)
- Auto Laser Shutdown (ALS)
- Dip Switch setting data rate
- Detect fibre transmitter error Alarm
Specifications:
Optical Interface:
- Connector: SFP LC
- Data rate: 28M to 2.7Gbps
- Regeneration: Re-amplification, Re-shaping, Re-timing
- Loopback: Line / Client
- Fibre: MM 62.2/125μm, 50/125μm. SM 9/125μm
- Wavelength:
- MM 850, 1310nm
- SM 1310, 1550nm
- WDM 1310T/1550R, 1550T/1310R
- CWDM 1470 ~ 1610nm
- DWDM 1529.55 ~ 1565.50nm
Indications: LED (Power, Line Link, Client Link, Test, Loop back, Port Active, Alarm)
Power Input: Card : 12VDC , Standalone : AC,DC option
Power Consumption: <10W
Dimensions: 155 x 88 x 23mm ( D x W x H)
Weight: 120g
Temperature: 0 ~ 50°C (Operating), -10 ~ 70°C (Storage)
Humidity: 10 ~90% non-condensing
Certification: CE, FCC, LVD, RoHS
MTBF: 65,000 hrs (25°C)