C3110 Series - 1000BASE-T to 1000BASE-SX/LX Slide-in-Module
The ION C3110 device provides an interface between 1000Base-T ports and 1000Base-SX/LX ports allowing users to integrate fibre optic cabling into 1000Base-T copper environments.
Features:
- Copper and Fibre Auto-Negotiation
- AutoCross™ on TP port
- Link Pass Through
- Remote Fault Detect
- Loopback
- Pause
- Automatic Link Restoration
- Field Upgradeable Firmware
Specifications:
Standards: IEEE Std. 802.3ab, IEEE 802.3z, IEEE 802.3 2000
Data Rate: 1000 Mbps, Layer-1
Switches:
- SW1: Remote Fibre Fault Detect
- SW2: Pause (symmetric)
- SW3: Pause (asymmetric)
- SW4: Transparent Link Pass Through (Up=Enabled)
- SW5: Fibre Auto-Negotiation (Down=Enabled)
- SW6: Loopback
Hardware/Software Jumpers:
- Hardware: Mode of operation is determined by the settings on the 4-position switch
- Software: Mode of operation is determined by the most recently saved on-board microprocessor settings
Status LEDs:
- LKF (fibre link): On = Fibre Link, blinking activity
- PWR (Power): On = Connection to powered backplane
- TP LED 1 (Copper Link): On = Link, bliking activity
- TP LED2 (Copper Duplex): On = Full Duplex
Dimensions: Width: 0.86” [22 mm]; Depth: 6.5” [165 mm]; Height: 3.4” [86 mm]
Power Consumption: 3.6 Watts, 300mA @ 112 VDC
Shipping Weight: 1 lb [.45 kg]
Regulatory Compliance: CISPR/EN55022 Class A, FCC Class A, CE Mark, EN55024
Warranty: Lifetime
