S3280 Series - Remotely Managed NID
The Remotely Managed S3280 NID provides advanced packet performance metering and service creation directly at customer premises and cell sites. The S3280 is optimized for business Ethernet and mobile backhaul deployments. The S3280 is a multi-service NID that provides SLA-assurance and advanced fault management that is MEF CE2.0 certified. IEEE 802.1ag Service OAM, ITU Y.1731 Performance Monitoring and IEEE 802.3ah Link OAM are standard features. The S3280 supports advance features such as IPv6 and IPv4, VLANs, QoS, bandwidth allocation, ring protection, jumbo frames and numerous security features. The product supports SSL/SSH, RADIUS, TACACS+, Management VLAN and ACL rules. The S3280 offers three power inputs for redundancy and DC inputs for extended operating temperature in extreme environments. The SFP ports are triple speed and support 100Mbps, 1000Mbps or SGMII SFPs. CWDM and Bi-Di SFPs are also supported, allowing for flexible network architectures.
Product Features:
- 4 x 10/100/1000Mbps Base–T ports
- 4 x 100/1000Mbps SFP ports
- Any port can be network or client
- SNMP v1, v2c, and v3
- IPv6 and IPv4 support
- VLAN (802.1Q); Q-in-Q (C-Tag / S-Tag)
- RMON and Syslog
- 4OAM Support:
- IEEE 802.3ah Link OAM.
- IEEE 802.1ag Service OAM and
- ITU Y.1731 Performance Monitoring
- Protection: ITU G.8032/G.8031; STP, RSTP, MSTP
- IEEE 1588v2
- SyncE (S3280-S model)
- Two DC power (18-57 VDC) inputs and one AC input
- Jumbo Frame Support (9.6K)
- -40°C to 75°C operating temperature
- Fan-less design
Software Features:
- E-LINE (EPL and EVPL); E-LAN (EP-LAN and EVP-LAN); E-ACCESS (ACCESS EPL and EVPL)
- UNI or NNI configuration
- TOS/Diffserv
- Quality of Service (802.1p): 8 queues; strict priority and WRR, shaping, policing, P-bit and DSCP
- Management via Converge™ EMS, CLI, Web, SSH/SSL and SNMP (V1, V2, & V3)
- Port configuration, status, statistics and monitoring
- RADIUS, TACACS+ and ACL
- Remote backup / restore configuration; Remote firmware upgrades
- Alarms via Syslog & SNMP; Remote loopbacks
- L2CP; LLDP
- Diagnostic Monitoring Interface – SFF-8472
- Dying/Last Gasp
- Port Mirroring
- Link Aggregation Control Protocol (LACP)
Specifications:
Standards: IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-TX, IEEE 802.3z for 1000Base-X, IEEE 802.3ab for 1000Base-T, IEEE 802.3x for Flow control, IEEE 802.3ad for LACP, (Link Aggregation Control Protocol), IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol), IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol), IEEE 802.3ah Link OAM, IEEE 802.1ag SOAM FM, IEEE 1588-2008 (v2) Precision Time Protocol (PTP), ITU G.8261 Synchronous Ethernet ITU Y.1731 PM
Maximum MAC Addresses: 8K
Maximum Frame Size: 9,600 bytes (9.6K)
Data Rate: Copper ports (RJ-45): 10/100/1000 Mbps; SFP ports (empty): 100/1000 Mbps or SGMII
Status LEDs: Power, Port Activity and Port Duplex
Dimensions: Width: 9.775” [248.23 mm], Depth: 6.5” [165 mm], Height: 1.75” [44.45 mm]
Input Power: AC: 12 VDC via barrel connector using 100-240VAC; Redundant DC: 18-57VDC via terminal block
Environment:
- -20°C to +65°C Long term operating temperature
- -40°C to +75°C Short term operating temperature
- 5%– 95% humidity non-condensing
- -40°C to +85°C storage temperature
Safety Compliance: UL listed, CE, EN55022 Class A
Warranty: 5 Year Hardware