GSW-3208M1 8 Port L2 Ethernet Managed Switch

8 Port L2 Ethernet Managed Switch

The GSW-3208M1 is a cost-effective high performance L2 Ethernet Managed Switch which supports 8 x 10/100/1000Mbps TX ports and 2 x SFP ports. This switch supports remote management by SNMP, Http and Telnet interfaces, and local management by console interface. GSW-3208M supports many L2 switch management functions, e.g. 802.1Q VLAN, 802.1x Port Security, Rate Control, Port Configuration, Port Mirroring, Port Statistics, QoS functions, ... etc. Auto-MDIX function is supported for every TX port of the switch for easy cable connection.

8x10/100/1000-T + 2x1000-SX/LX SFP L2 Managed Switch schematic


  • 8x RJ45 ports, with 10/100/1000Mbps, Full/Half duplex auto-negotiation and Auto-MDIX functions
  • 2x SFP sockets, Port9 and Port10
  • Jumbo Frame
  • Out-band console and in-band SNMP/Http/Https/Telnet management interface
  • CISCO-like Command Line Interface
  • 802.1Q VLAN, 1024 active VLAN maximum with VID 1~4094
  • Port-based VLAN
  • Private VLAN
  • DHCP Relay Option 82
  • IP-Port Binding
  • Broadcast Storm control
  • Q in Q
  • 802.3ad LACP for link aggregation
  • 802.1x for user authentication, Dynamic VLAN and Guest VLAN are supported
  • IGMP snooping and query and MVR
  • 4 priority queues for Port-based, 802.1P QoS operation, with Strict Priority/WRR scheduling
  • 802.1d Spanning Tree Compatible & 802.1w Rapid Spanning Tree
  • Port rate limit for ingress/egress traffic
  • Static MAC address binding / Dynamic Mac address number limit
  • Event log and Syslog are supported
  • Administrator IP/Subnet limit for security


Ports: 8x RJ45 ports, for 10/100/1000Mbps, Full/Half duplex auto-negotiation and Auto-MDIX and Force MDI/MDIX function; 2x SFP Port 9 and Port10
Console Port: DB9 console port
Filter & Forward Rate: Full line speed
Transmission method: Store-and-forward
Packet Buffer: 500K Bytes
Mac Table Size: 8K
Max Packet Size: 1518 bytes (without tag), 9600 bytes for Jumbo Frame
Flow Control: Back pressure for half duplex, IEEE802.3x for full duplex
Management: Out-band : Console (CISCO-like Command Line Interface); In-band : SNMP/Telnet/Http/Https; Administrator IP/Subnet limit is supported
DHCP: Support DHCP Client / Relay / Option 82 functions Version. 1, 2c
SNMP agent: Support MIB II(RFC1213), Bridge MIB (RFC 1493), VLAN MIB (802.1Q, RFC2674), Private MIB
VLAN: 802.1Q VLAN with 1024 co-current groups maximum from 4094 VLANs Port-based VLAN; Private VLAN
Q in Q: Yes
Trunking: Support up to 8 trunks using either static or dynamic trunking(LACP)
QoS: Four priority queues per port for Port-based & 802.1p tagged-based QoS Strict Priority/WRR scheduling
Spanning Tree: 802.1d Spanning Tree Compatible & 802.1w; Rapid Spanning Tree
Port Mirror: Yes
Static Mac ID Limit: Yes, Limit on port
Dynamic Mac ID Limit: Yes
IP-Port Binding: Yes
IEEE 802.1x: Yes, Support Transparent and Authentication modes; Dynamic VLAN & Guest VLAN are supported
Rate Control: Yes, 1~31 levels, with level is configured between 128Kbps ~ 30Mbps
Storm Control: Broadcast/flooding/multicast control
IP Multicast: Yes, IGMP Snooping (256 Groups Max.) / query and MVR function
Software Upgrade: Out-band: Xmodem, In-band: TFTP/Http
Text Configuration: Yes, for easy edit
Event Log: Yes, and Syslog is supported
Configuration: Yes
Down/Upload: Yes, and Syslog is supported
LED Display: Per Port : Link/Act (Green:Gigabit, Yellow:10/100M), Full Duplex Per Device : Power, System
Input Power: 100~240VAC, 50/60 Hz, 36 ~ 72VDC
Power Consumption: Max. 8 Watt
Environmental: 0 ~ 50°C
Humidity: 10% ~ 90% (non-condensing)
Standards: IEEE802.3(10BaseT Ethernet), IEEE802.3u(100Base Fast Ethernet), IEEE802.3ab(1000BaseT), IEEE802.3z(1000Base), IEEE802.1D, IEEE802.1w, IEEE802.1P, IEEE802.1Q, IEEE802.1x