Lanode.com

  • Increase font size
  • Default font size
  • Decrease font size
TDM's

10G 8x Gigabit TDM

E-mail Print

10G 8x Gigabit TDM

10G 8x Gigabit TDM

The 8 port Gigabit TDM aggregates via time-division multiplexing (TDM) up to eight channels into a 10G Gigabit data stream and supports both Gigabit Ethernet and 1G Fibre Channel. Thus the transmission capacity of a 10G system can be significantly increased and maximized. The transmission on the line side can be achieved with standard XFP modules, or even with integrated DWDM Fixed Fibre Interfaces (FFI). For redundant or ring applications, the line interface can also be redundant. With the optional FEC-function (Forward Error Correction) great distances of 120 km and more can be achieved. For the exchange of network management information, the module has an integrated 10 Mbps data channel (in-line remote management), which will be transferred without restriction of the eight 1 Gigabit channels and is used for the coupling of the management modules via Ethernet. In addition, this Ethernet channel may be used for service purposes.

Read more...
 

10G 4 Port STM-16 TDM Module

E-mail Print

10G 4 Port STM-16 TDM Module

10G 4 Port STM-16 TDM Module

The 10G 4 port STM-16 TDM Multiplexer Module is a part of the 10G Transport Platform, a high performance and flexible carrier-class transmission system. The module is a bidirectional plug-in unit offering the aggregation and transport of four telecom transparent services (OC 48/STM-16) onto a 10 Gb/s G709 OTU2 signal. The line bit rate can be G.709, OC-192/STM-64 or standard SONET/SDH signal. The module can be managed through SNMP or MICROSENS Network Management Platform (NMP). Digital Diagnostics Monitoring (DDM) is supported for SFP, XFP and FFI interfaces. The TDM Multiplexer module occupies two slots in the MICROSENS chassis and is powered through the backplane of the chassis.

Read more...
 

10G 5 Port 2G Fibre Channel TDM

E-mail Print

10G 5 Port 2G Fibre Channel TDM

10G 5 Port 2G Fibre Channel TDM

The 10G 5 port Gigabit Fibre Channel TDM Multiplexer Module is a part of the 10G Transport Platform, a high performance and flexible carrier-class transmission system. The module is a bidirectional device offering the aggregation and transport of up to 5 datacom client ports (GbE, GFC, 2GFC) onto a 10 Gb/s signal. The module can be managed through SNMP or MICROSENS Network Management Platform (NMP). Digital Diagnostics Monitoring (DDM) is supported for SFP, XFP and FFI interfaces. The module includes advance management, product modularity, and high availability at a very attractive price. The 2 U chassis accepts up to 2 modules which allow the interconnection of up to 10 x 2GFC/GFC via 2x 10G between two data centres with a distance of 80 km. The module occupies two slots in the MICROSENS chassis and is powered through the backplane of the chassis.

Read more...
 

10G 4 HD-SDI Video TDM Module

E-mail Print

10G 4 HD-SDI Video TDM Module

10G 4 HD-SDI Video TDM Module

The 10G Video TDM module aggregates up to four HD-SDI or SD-SDI channels with one GBE and one FE on one 10 Gbps wavelength. Multiple wavelengths can be muxed together with WDM (Wave Division Multiplexing) and transported over fibre. Each video port auto-senses between SDI, HD-SDI-PAL, HD-SDI-NTSC signals and is individually configurable.  It aggregates up to four HD-SDI or SD-SDI with one GbE and on eFE on one 10 Gb/s wavelength. The aggregation module eliminates the need for network edge elements such as SDI encoders and ATM switches that are traditionally required for native video transport. Furthermore, it simplifies the carrier network and reduces the operational cost of managing new and complex network elements. The module is hot-swappable and takes 3 slots in a MICROSENS chassis. On the Client side it uses Coaxial BNC interfaces for SDI ports, a standard RJ-45 port for FE and SFP for the GBE port. On the Line side, it uses XFP or FFI (40km, 60km and 80kms B&W or DWDM) or tunable FFI interfaces. The Aggregation and Transport module is also available with a second Line interface that provides 1 + 1 protection.

Read more...
 

1G 3x SD-SDI Video TDM Module

E-mail Print

1G 3x SD-SDI Video TDM Module

1G 3x SD-SDI Video TDM Module

The 1G 3x SD-SDI Video TDM Module is a part of the MICROSENS 10G transport platform. The line rate is 1.25 Gb/s which is compatible with all of MICROSENS Gigabit Ethernet aggregation modules. Access ports can auto sense between SD-SDI or DVB-ASI traffic. The module is hot-swappable and takes 2 slots in the MICROSENS chassis. On the Client side it uses coaxial BNC interfaces and on the Line side, it uses SFP. An optional Optical Supervisory Channel (OSC) is available for remote management. The module aggregates up to three uncompressed SD-SDI video signals or up to three DVB-ASI or any combination of them. Service Providers addressing the market for video distribution and Media companies wishing to transport multiple uncompressed SD-SDI or DVB-ASI signals between different sites using fibre optic are typical users of this module. Uncompressed video is mainly used in pre- and post-production, editing and in broadcasts of live events. The key benefit of this module is elimination of the need for compressing video signals before transport which is important in applications where high video quality is required. Compression of video signals results in a loss of quality. It allows customers to aggregate and transport a mix of video signals together with SONET/SDH/TDM and Ethernet traffic on a single wavelength. Using aggregation of multiple protocols reduces the number of wavelengths in the network and provides a lower cost compared to other alternatives.

Read more...
 

2 Port GBE Multi functional TDM Module

E-mail Print

2 Port GBE Multi functional TDM Module

2 Port GBE Multi functional TDM Module

The 2 port GBE Multi functional TDM Multiplexer module is a part of the 10G Transport Platform, a high performance and flexible carrier-class transmission system. The module is a bidirectional device offering the aggregation and transport of up to 2 Gigabit Ethernet/Gigabit Fibre Channel datacom client ports onto a 2.5 Gb/s SONET/SDH signal. The module can be managed through SNMP or the Network Management Platform (NMP). Digital Diagnostics Monitoring (DDM) is supported for SFP interfaces. The TDM Multiplexer module occupies one slot in the MICROSENS chassis and is powered through the backplane of the chassis. It's an ideal solution for service providers that offer GBE and OC-48 services.

Read more...
 

4 port STM-1 TDM Multiplexer Module

E-mail Print

4 port STM-1 TDM Multiplexer Module

4 port STM-1 TDM Multiplexer Module

The 4 port STM-1 TDM Multiplexer module is a part of MICROSENS 10G Transport Platform, a high performance and flexible carrier-class transmission system. The module is a bidirectional plug-in unit offering the aggregation and transport of up to 4 x OC-3/STM-1/ESCON/Fast Ethernet over one 1.25G line or 3 x SDI over one 1.25G line or 1 x OC12/STM-4 over one 1.25G line. The module can be managed through SNMP or MICROSENS Network Management Platform (NMP). Digital Diagnostics Monitoring (DDM) is supported for SFP interfaces. The TDM Multiplexer module occupies one slot in the MICROSENS chassis and is powered through the backplane of the chassis. Ideal solution for wireless back-haul networks and ATM/GBE DSLAM back-hauling.

Read more...
 



How can we help?

Search

Live Demo of FRM220 Chassis

Related Products