Lanode.com

  • Increase font size
  • Default font size
  • Decrease font size
Home Products Multiplexers Fibre Optic 16x E1 + 4 x 10/100 Ethernet Fibre Multiplexer

16 x E1 + 4 x 10/100 Ethernet Fibre Multiplexer

E-mail Print

FMUX160 16 x E1 + 4 x 10/100 Ethernet Fibre Multiplexer

16 x E1 + 4 x 10/100 Ethernet Fibre Multiplexer

The FMUX160 is 1U 19” rack mountable, PDH Fibre Optic Multiplexer that transmits up to 16x E1 + 4 x 10/100Base-T(X) Fast Ethernet over a single fibre optic link. The FMUX160 chassis in available in five different power configurations; single AC, single DC, dual AC, dual DC, or AC+DC. The AC supplies operate from 90 ~ 240VAC while DC supplies operate from 18~72VDC. On the rear of the chassis, the BNC model provides 16 unbalanced 75 Ohm coaxial connections with BNC connector while the RJ-45 model provides 16 balanced 120 Ohm connections over twisted pair wiring with RJ45 connectors . With two SFP sockets on fibre ports, the FMUX160 gives you the fibre cabling connector SFP-LC, both multi-mode and single-mode are available as well as BiDi which allows bi-directional transmissions using only a single fibre cable. 1+1 Automatic optical line protection is also supported for the aggregate fibre ports. The standard FMUX160 configuration may be viewed or set via serial VT-100 terminal connection or SNMP card with web, telnet, and SNMP management.

16x E1 + 4 x 10/100 Ethernet Fibre Multiplexer schematic

Features:

  • Provides 16 E1 G.703 transparent transmission over the fibre
  • Provide 4 x 10/100 Mbit/s Ethernet Ports (100Mbps aggregate)
  • Provides one RS232 channel
  • Provides one hotline channel ( order-wire )
  • Supports full/half duplex, 10M/100M, auto-Negotiation
  • Supports IEEE802.1q tagged and port based VLAN
  • Forward 10K byte jumbo packets on Ethernet port
  • Supports 1+1 fibre line protection. Less than 50ms
  • Complete alarm function and can monitor remote device status
  • Loopback test on E1, fibre port
  • Power combination AC220V and DC-48V for redundant options
  • Supports RS232 local management
  • Supports Web, Telnet, SNMP management (options)
  • Supports on-line f/w upgrade

Specifications:

Optical Interface

Connector: SFP- LC
Data rate: 155Mbps
Bit Error Rate: Less than 10-11
Distance: MM 2km, SM 15/30/50/80/120km, WDM 20/40/60/80km
Wavelength: 1310nm, 1550nm, CWDM 1471nm ~ 1611nm

Electrical Interface

Connector Console: RS232
SNMP: RJ45
Ethernet: RJ45 (4-port)
Alarm: RS232
Order wire: RJ11

Standards: ITU-T G.703, G.823 and G.742, ANSI, AT&T, IEEE803.2, IEEE802.3u
Indications: Power, Alarm, LBK, RD, LCK, RNG, ACO, Port, channel
Power Input: 100 ~ 240VAC, 20~60VDC, 36~72VDC
Power Consumption: <40W
Dimensions: 250 x 438 x 43mm (D x W x H)
Weight: 3.58kg
Temperature: 0 ~ 60°C (Operating), -10 ~ 70°C (Storage)
Certification: CE, FCC, LVD, RoHS