Lanode.com

  • Increase font size
  • Default font size
  • Decrease font size
Home Multiplexers SDH iSAP1000 STM1/E1 Multiplexer

iSAP1000 STM1/E1 Multiplexer

E-mail Print

iSAP1000 STM1/E1 Multiplexer

iSAP1000 STM1/E1 Multiplexer

The iSAP1000 is 1U 19” rack type STM-1/E1 terminal multiplexer which delivers traditional PDH services over SDH networks. iSAP1000 provides connectivity for up to 16E1. The product complies with SDH standards and interfaces with existing SDH backbones through a single or 1+1 protection STM-1 interface. iSAP1000 supports a variety of management access over console, Telnet and SNMP. iSAP1000 provides two Gigabit Combo ports (2-port 10/100/1000Base-T and 2-port 1000Base-X SFP slot) with 16x E1 or 2x STM-1 fibre interfaces. The two GE combo ports support Link aggregation, port based VLAN and 802.1Q VLAN function.

Applications:

iSAP1000 STM1/E1 Multiplexer schematic

iSAP1000 STM1/E1 Multiplexer schematic 2

iSAP1000 STM1/E1 Multiplexer schematic 3

iSAP1000 STM1/E1 Multiplexer schematic 4

Features:

  • Provides 2-port STM-1 fibre with 1+1 protection.
  • Supports Internal clock and recovery clock modes
  • Supports Single E1 fractional and unframed E1 service; Multiple E1, fractional E1
  • Supports PCM31, FAS+CRC4, CRC self-test
  • Supports HDLC/GFP bridge operation, 16x VCG with total 16 remote device, 16E1 Per VCG, MAX data rate 32Mbps Per VCG
  • Supports 16E1 balanced RJ45 or unbalanced BNC connectors
  • Maximum 220ms delay variance between E1 links
  • Supports 2x GbE Combo ports
  • Supports IEEE 802.1Q VLAN and QinQ, Link aggregation
  • Fibre port support ALS(Auto Laser Shutdown) function
  • Built-in BERT for performing local and remote loopback
  • Supports Console, GUI, telnet and SNMP management
  • Supports local and remote FTP/TFTP f/w upgrade
  • Complies with ITU-T G.8040 standard

Specifications:

Ethernet Interface:

  • Supports 2x GE combo ports
  • Auto Negotiation, AUTO-MIDX, 10M/100M/1000M,
  • Full/Half Duplex
  • Connector : RJ45
  • Supports 802.3x flow control

Optical Interface:

  • 1000FX, SFP
  • Connector : LC
  • Supports 802.3x flow control

E1 Interface:

  • Up to 16x E1(ITU-T G.703)
  • Line Impedance : 75ΩBNC or 120ΩRJ45
  • Bit rate : 2048kbps±50ppm
  • Line code : HDB3

STM-1 Interface:

  • Supports 2x STM-1 optical fibre port with SFP slot
  • Supports 1+1 optical fibre protection

Management port:

  • One console port with RJ45 connector One SNMP
  • Ethernet port with RJ45 connector

LED Indicators: SYS, PWR, PWR1, PWR2, GE(LNK/ACT, SD), E1(LOS, SYNC)
Standards: IEEE802.3 Ethernet, IEEE802.3u, IEEE802.3Z, IEEE802.3X, IEEE802.1Q, IEEE802.1ad, SNMPv1/v2c/v3, ITU-T G.703, ITU-T G.704, ITU-T G.823
Dimensions: 310 x 440 x 44mm (D x W x H)
Power: AC: 90-265V, DC: -48V, Supports AC+AC, DC+DC, AC+DC
Power Consumption: <24W
Temperature: Operating: -5 ~ 50°C; Humidity : ≤90% non-condensing


 

How can we help?

Search

Live Demo of FRM220 Chassis

Related Products